Useful Tips

How to remove mold in the bathroom with sealant?

Our experienced team of editors and researchers contributed to this article and tested it for accuracy and completeness.

The number of sources used in this article is 15. You will find a list of them at the bottom of the page.

The wikiHow content management team carefully monitors the work of editors to ensure that each article meets our high quality standards.

If mold has appeared on the silicone, then it will take a long time to remove and replace the old sealant. Fortunately, mildew can be eliminated differently. Try cleaning silicone with ordinary household products such as ammonia or bleach (DO NOT MIX these chemicals and never use them at the same time!). Such products are guaranteed to destroy mold, while in some cases milder, non-toxic substances like vinegar and baking soda can also cope with the task!

Why does mold appear on the sealant?

The main cause of mold on all types of surfaces is excessively humid indoor air. Additional factors contributing to the active growth of mold may be the lack of a good ventilation system, insufficiently insulated walls, poor sealing of the joints between the panels.

If mold has appeared on a surface that has been treated with a silicone sealant containing fungicides, then the reason most likely lies in the poor quality of the product. If you used a sealing agent from a trusted manufacturer, of which you are sure, then you should look for other reasons. For example, mold could appear as a result of unfair work to seal the seam or due to the presence of cracks and chips in the structure of the working surface.

Share in social. networks:

Silicone sealant is a very important, indispensable component when equipping a room with plumbing fixtures, it is also needed when carrying out various types of work. The sealant forms a layer that can withstand the threat of a temperature drop or aggressive detergents. There are sealants (sanitary silicone) containing in their composition additives called “fungicidal”, which protect the surface from mold and fungus. And here the mold itself and fungi are a very common problem in an airtight bathroom. Below, you will find useful tips on the topic: fungus in the bathroom with sealant - how to remove?

Causes

The main reason is the large amount of humid air in the room. Contributing factors may include:

  • poor ventilation system
  • non-insulated walls
  • lack of good sealing of the joints between the panels.

Perhaps you have a hermetic coating with a fungicide additive, but the mold still made its way? Then you should think about the quality of the product. Another option is also possible: for example, during work, someone cheated and made some mistakes or tried poorly to provide you with a quality result.

The reasons that the fungus wound up in the bathroom on the sealant are a lot. How to remove it and prevent the resumption of colonies - this is what should certainly interest you. Otherwise, harmful spores will soon not only spread across the entire surface of the bathroom, but also penetrate your body.

Mold damage

Mold can both help a person and harm. If you find the first signs of mold - act immediately.

Mold is spread by spores - these are microscopic particles that fly around in the air and settle in other places where their new nucleation can begin.

They harm our airways, organs of the nasopharynx, digestive system and other vital systems of the body.

Important! A fungus is very dangerous for people with low immunity and allergies.

We remove the mold

If you need to remove mold in the bathroom from the sealant, there are many means for this. Therefore, do not despair and look for a new place of residence - arm yourself with one of the following means, and act.

One of the simplest and safest options:

  1. In a small container, mix water and any bath cleaner.
  2. Wet the sponge and wipe the contaminated area.
  3. Thoroughly wash off mold from the surface.

Next, it is necessary to disinfect the problem area so that invisible spores do not continue to spread:

  1. Take, for example, bleach based on chlorine - the usual “Whiteness” is quite suitable.
  2. Apply, leave for 15 minutes (if you do not have so much time, you can not wait).
  3. Before rinsing, rub well into the sealant so that everything is perfectly absorbed.
  4. Wash off, wipe dry.

Substances with a chlorine content have good reviews regarding the control of fungus in the bathroom on sealant and other surfaces. You can apply in this way:

  1. Bred in a ratio of 1: 1.
  2. Next, spray to the surface.
  3. You can not rinse a couple of hours, but it’s good to ventilate the room.

Important! The problem is that the treated area may turn yellow - you will have to come to terms with it if you use such a tool and be prepared for a similar result.

Try to treat the sealant with a specialized chemical product aimed at destroying the fungus, and not at all for its prevention. For example, the Neomid 600 has proven its worth.

Another simple and cheap tool to remove the fungus in the bathroom on the sealant:

  1. For 4 parts of water, 2 parts of detergent and ammonia.
  2. We are waiting for about half an hour - you need to let the tool soak.
  3. Wash thoroughly with a brush.

Borax Removal:

  1. We dissolve in water - the ratio of 1 cup to 2.5 liters of water.
  2. Wet the old toothbrush and thoroughly clean the place of contamination.
  3. Later, wipe with a dry soft cloth.

Important! It is undesirable to wash off the solution, because it forms a protective layer against mold.

There is probably white table vinegar in every home. In this case, it is useful to you to remove the fungus in the bathroom with sealant:

  1. We spray the problematic ones with undiluted vinegar through a spray bottle.
  2. After 60 minutes, rinse with a sponge dipped in water.
  3. It may be necessary to repeat the procedure the next day.
  4. Do not forget to ventilate the room, as vinegar has a pungent smell and its fumes adversely affect our health.

Important! Be careful, as vinegar is an acid that can corrode some types of sealing putty. As a result, you can get rid of not only mold, but also of the sealant itself. It’s better to use this remedy (as a regular prevention, too) on the tile.

Hydrogen peroxide is an excellent antiseptic that will fulfill its direct function - to fight fungi:

  1. Hydroperite is applied to the sealant in undiluted state.
  2. After a couple of minutes, wipe the sealant with a soft sponge or rag.

Baking soda is another agent that is always present on the farm, which also gives a cleaning and disinfecting effect. For its use in order to remove mold in the bathroom from the sealant:

  1. We dilute in the ratio of half a tablespoon to 250 ml of warm water.
  2. Rub with a stiff brush, then rinse.
  3. In order to consolidate the effect, repeat the procedure.

If suddenly the mold was under the tile:

  1. It is necessary to open the tile joints using a rasp or electrophoresis.
  2. We clean the seams, gloss over with an antifungal additive.
  3. Grout again.

Tea tree oil or other essential oils:

  1. Mix one teaspoon in a glass of water.
  2. Next, you need to go through the mixture to the contaminated area.
  3. Rinse off is not necessary - the smell will pass through a couple of days.

Important! Essential oils, in particular tea tree, have an antifungal, antiseptic effect, and therefore help in the fight against mold.

Mold is back!

In some cases, the mold returns, and to the same place. The reason is that the root of the problem, in fact, comes from under the sealant. So - you have to delete it:

  • In our hands we take something sharp and thin, for example, a knife.
  • Carefully cut the layer along the upper and lower edges of the seam.
  • Having picked up, we take out sealant from a seam.
  • Feel free to throw it away, as mold spores are firmly seated there.
  • If you find dirt inside the seam, that is most likely cleaned with a knife.
  • Disinfect the seam with isopropyl alcohol - pour it, wait 20-30 minutes.
  • Then we moisten the seam with a soft rag with an antibacterial agent (we do not use the bath for a day).
  • We apply a sealing layer - this time, preferably with the addition of a fungicide, which prevents the formation of mold.
  • In order for the sealant layer to dry completely, we wait another day.

That's it, your bath is sanitized and looks like new! Now you know how to remove the fungus in the bathroom on the sealant.

Prophylactic agents

In order to continue to forget about mold forever, you need to be puzzled by a few more points:

  • Good quality ventilation system. In addition to her, do not forget to leave the door ajar - the ventilation system is certainly good, but it can not cope without an influx of air from outside.
  • We eliminate all sources that support moisture. So for example: a dripping tap, condensate on the toilet bowl.
  • Cracking up. Any crack, whether it is on the ceiling or floor, contributes to the penetration of mold, even from other apartments.
to contents ↑

What is dangerous mold in the bathroom?

Mold is an amazing organism that can bring benefits to a person and cause harm. The kind of mold that settles on the surfaces in our house is of the latter type. Therefore, if you find the first signs of the spread of mold in both residential or non-residential premises, get rid of it as soon as possible.

It is known that mold spreads with the help of spores - microscopic particles that can freely fly around the house, populating more and more areas. Even if you managed to get rid of the main mold, the spores spreading around the apartment can cause the growth of new foci.

The harm that mold causes to the human body does not immediately become noticeable. The spores that we breathe together with the air can provoke quite serious diseases of the respiratory tract, nasopharynx, digestive system and other vital organs. Allergies and people with weakened immune systems are at increased risk.

Surface mold removal

The way to deal with mold that has appeared on silicone sealant depends on the extent of the problem and how long it has appeared. A small area of ​​“fresh” mold can simply be washed off and then treated with an antiseptic. If you manage to take action quickly, then most likely the mold will not return. Otherwise, you have to resort to a more radical method.

How to clean silicone sealant from mold?

  • Pour warm water into a small container and pour (pour) into it any cleaning agent for the bathroom. Mix the solution well.
  • Dampen the sponge in the resulting mixture and wipe the problem area. Rinse the mold thoroughly from the surface.
  • Rinse with a large amount of clean water.
  • Now the surface affected by mold should be disinfected so that the remaining spores do not grow. To do this, any disinfectant that you have at home, for example, bleach, is suitable.
  • Apply bleach to silicone sealant. Leave it on for 12-14 minutes for the best effect. After this, the sealant will not only be disinfected, but will also shine with whiteness.
  • Before washing off the disinfectant, rub the surface well with a sponge or brush so that it penetrates into the microcracks and destroys all the mold spores hidden there.
  • Then rinse the bleach and wipe the silicone sealant dry.

What if mold returns?

It happens that some time after removal, the mold appears in the same place again, and even careful processing of the problem area with effective means does not help. In this case, the distribution center should not be sought on the surface of the silicone sealant, but under it. If so, then to get to the source, the sealant layer will have to be removed.

  • Old silicone sealant can only be removed mechanically. So arm yourself with a small knife and start cutting the silicone sealant along the top and bottom edges of the seam.
  • After making the cuts, pick up a layer of silicone from one end and remove the cured sealant from the seam. It is best to discard the old silicone sealant immediately, as mold spores are firmly established in its structure.
  • Inside the seam, you will most likely find mold, small debris and other muck. All this must be thoroughly cleaned with the same knife.
  • Now the cleaned area needs to be disinfected to make sure that the mold does not appear again. One of the most effective means is isopropyl alcohol. Pour it into the seam and leave for 20-30 minutes.
  • After this, blot the seam with a dry cloth and leave for a day until completely dry. You cannot use the bathroom all this time.
  • The dry surface should be re-treated with silicone sealant. Try to choose a quality bathroom sanitary sealant that contains additives that prevent mold.
  • Insert the tube with sealant into a special gun, cut the nozzle at an appropriate angle and evenly distribute the product throughout the seam.
  • In order for the silicone to completely dry, you must wait another day.

Folk remedies

In the fight against mold, you can use folk recipes, many of which are much more effective than expensive store-bought products. Some of the many ways that housewives use to eliminate mold in the bathroom are presented below.

Sodium tetraborate (popularly called “borax”) is dissolved in water in the ratio of 1 cup of the drug to 2 ½ liters of water. Moisten an old toothbrush in this solution and thoroughly wipe the mold-affected area. Then collect the remaining solution with a clean, dry cloth. It is not necessary to wash off the solution, since it forms a protective layer against mold.

White table vinegar is an effective, and, most importantly, affordable anti-mold tool in the bathroom. It is enough to sprinkle mold-covered places with undiluted vinegar through a spray bottle, and after 60 minutes wash off with a sponge moistened in water. If necessary, repeat the procedure the next day. Vinegar has a pungent smell and its fumes can negatively affect one's well-being, so do not forget to ventilate the bathroom every time after this procedure.

Hydrogen peroxide is probably in your medicine cabinet. This drug is indispensable not only for treating wounds, but also for sterilizing mold-affected areas. Hydroperite tablets should be diluted in water according to the instructions, and the finished solution should be applied undiluted. It is better to work with gloves, as long-term contact with hydrogen peroxide can damage the skin of the hands. You do not need to rinse the solution, after a few minutes just blot the treated surface with a dry sponge or cloth.

Ordinary baking soda also copes with the task of eliminating mold. It is absolutely safe for humans, it costs a penny and can be found in everyone’s house. To prepare a cleaning product, you need to mix a quarter teaspoon of soda in 250 ml of warm water. Rub the resulting solution into the mold area with a stiff brush, then rinse. Fix the effect by repeating the operation again.

Essential oils are also quite effective in combating mold. Tea tree oil is especially effective, known not only for its pleasant aroma, but also for its good antiseptic properties. One teaspoon of essential oil should be diluted in a glass of warm water and treated with a solution to the problem area. Rinse off the product is not necessary. After applying the solution, the intense smell of tea tree essential oil will persist for some time, but after a couple of days it will disappear.

Prevention

After removing mold from silicone sealant, all precautions must be taken to prevent it from reappearing. The complex of preventive procedures includes:

  • Ventilation system equipment. At the same time, remember that even the most powerful ventilation system can not cope with the task if you do not provide a constant flow of air into the bathroom (for example, through the gap in the door).
  • Sealing plumbing equipment in the bathroom. It is necessary to eliminate all sources of high humidity, including a dripping tap and condensate on the toilet bowl.
  • Wall insulation. If any of the walls of the room freezes in the winter, it is necessary to provide it with additional waterproofing.
  • Elimination of cracks in the walls, on the floor and on the ceiling. Mold spores can enter the bathroom from neighboring apartments even through microscopic gaps.